Glass Storage Jar Anti-corrosion Insulation

- Sep 04, 2017-

FRP tank is a new era of an industrial product, its main feature is the wear resistance and high temperature resistance, but its shortcomings is not enough hardness, prone to broken, so in storage, we must pay attention to safety, Let me introduce the safe storage requirements of glass fiber reinforced plastic storage tank.

1. Must be stored in the ground flat, Glass Storage Jar to avoid the collapse of the glass fiber reinforced plastic storage tank.

2. To clean up the storage space, do not have a hard object, Glass Storage Jar resulting in damage to fiberglass tank.

3. As the glass fiber reinforced plastic storage tank is low, so in storage, be sure to stay away from the fire, to keep the glass steel tank storage space well ventilated.

FRP hydrochloric acid tank is made according to the design conditions, can only be used in the design of the concentration of hydrochloric acid range, beyond the scope of use, will have a certain impact on the tank, it is generally not recommended beyond the scope of use, Glass Storage Jar such as another use, It is recommended to re-order to buy. Hydrochloric acid tank in use may be a leak event, today Xiaobian for everyone to bring hydrochloric acid tank leakage contingency plans:

1. a slight situation, a small amount of leakage, leaking or drip, tank point corrosion;

2. heavier circumstances, more leakage, Glass Storage Jar linear fluid, tank linear corrosion;

3. Serious situation, a lot of leakage, tank rupture.

Hydrochloric acid tank leakage emergency measures:

1. Slightly the case, Glass Storage Jar the recovery into the pool and wait for the tank after the use of hydrochloric acid treatment, maintenance tank;

2. heavier situation, recycling into the pool and wait for the tank after the use of hydrochloric acid treatment, maintenance tank;

3. Serious situation The remaining hydrochloric acid in the tank is quickly placed in the neutralization tank and neutralized with a liquid base to replace the tank.

FRP tank preservative insulation and the traditional metal cans corrosion insulation in the construction method is very different. Construction convenience, Glass Storage Jar improve efficiency, cost savings, easy to master, application and traditional construction methods have greater advantages. FRP tank anti-corrosion construction process material organization → tank test pressure, leak test → site survey → build scaffolding → insulation construction → protective layer construction → removal of scaffolding

1, tank test pressure, leak test

In the glass fiber reinforced plastic storage tank before the anti-corrosion insulation, the organization of the tank to conduct a preliminary appearance of the acceptance, Glass Storage Jar the inspection appearance without dead ends, no leakage before the tank strength and rigidity test.

2, material organization

Organize the material according to the drawings. Glass Storage Jar All anti-corrosion insulation materials should have a product certification, and indicate the date of production and effective date, issued by the State Quality Supervision Bureau of product quality testing reports, Glass Storage Jar product standards, the use of the manual and the batch of product inspection reports and other documents.

3, site survey

Familiar with the construction site, Glass Storage Jar choose a good material into the road, approach materials to be unified stacking, and pay attention to rain, moisture, insulation materials and galvanized iron can be placed in the glass tank under the tank chamber. Temporary electricity, water in the station near the access.

4, build scaffolding

In the glass steel tank around the scaffolding, Glass Storage Jar as most of the storage tanks are located on the platform, the space is relatively narrow, build scaffolding can take full advantage of platform fence, escalators, maintenance platform for scaffolding knot, fixed. Glass Storage Jar As the tank repair platform has been completed, so the scaffolding pole does not need to be higher than the platform, the first layer of the platform from the top of the tank can be about 1.5m.

5, wrapped in tropical

As the glass fiber reinforced plastic tank in the process of transport and installation will inevitably appear bump phenomenon, so wrapped in tropical tiles before the requirements of the tank on the outer wall of the tank to fill the local treatment. Glass Storage Jar The wall of the tank is welded in a winding manner, wrapped up from the bottom up, Glass Storage Jar and the heating distance is about 5 cm. The top of the tank is radially laid. Each tank requires about 10m of electric heating. The laying of the electric tape should be carried out under the guidance of the manufacturer. After the completion of electric construction after the remote test to see whether the access path. After the test heat pass to heat the next process.